Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Phoenix, AZ
A gate company in Phoenix, AZ has to solve problems most gate companies never see. The metal gates outside block-wall ranch homes in ZIP 85021 bake at surface temperatures hot enough to wreck a powder coat, and the caliche grit that monsoon haboobs blow across desert lots packs into sliding tracks hard enough to stop a gate mid-travel. We handle gate installation, gate repair, and electric gate repair for Phoenix homeowners, landlords, and property managers, and we work on the brand you already have instead of steering you toward a new one. Installations are measured, ordered, and scheduled around a written quote. Call (866) 361-9597 to set up a free estimate.
Why Phoenix Homes Are Different
Phoenix gates fail from sun and dust, not from rust and rot. The post-war to 1970s ranch homes across the 85021, 85020, 85029, and 85051 ZIP codes sit on block-wall lots with wrought-iron pedestrian gates, chain-link runs, and older sliding driveway gates, and much of that mid-century ironwork is showing heat fatigue rather than structural failure. Newer north Phoenix builds lean on stucco-and-block walls with decorative metal and vinyl gates, and those vinyl panels can warp in the same summer sun that seizes hinges once the original lubricant cooks off. Then monsoon season splits the year again: haboobs dump fine dust that jams tracks and rollers, and high winds rack lightweight gates out of plumb. Block-wall front yards are the norm here, which is why so many Phoenix gates double as dog containment, so a gate that will not latch is not a cosmetic issue.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Phoenix Services
These are the two jobs Phoenix homeowners call about most often, and each has its own page with pricing and turnaround details.
Gate Repair in Phoenix
Mechanical repair covers everything from a sagging pedestrian gate to a sliding driveway panel that will not roll. In Phoenix the pattern is predictable: grit from a dust storm packs the track, hinges stiffen after a summer of UV, and a gate that started as a five-minute adjustment becomes a racked frame. We look at the whole assembly, not just the symptom, which means checking footing, posts, and hardware alignment before we ever touch the panel. Our technicians have up to 12 years of experience on this exact kind of work. For details on Gate Repair in Phoenix, the scope and cost ranges are laid out there.
Electric Gate Repair in Phoenix
When the operator quits, gate down means security down. Electric gate repair here covers the full system: control boards, safety sensors, loop detectors, motor and actuator failures, remote and intercom wiring. Extreme heat is hard on openers and the electronics inside them, and dust works its way into the moving parts of the drive. We’re comfortable on budget residential operators and heavy commercial access systems alike, so a backyard swing gate and a multi-tenant entry get the same diagnostic approach. Visit Electric Gate Repair in Phoenix for what each repair typically runs and how a failed operator is diagnosed.
Gate Installation in Phoenix
New Gate Installation in Phoenix starts with the climate, not the catalog. A gate specified for a mild coastal market will warp, seize, or fail early in the north-central valley, where metal surfaces bake through summer and monsoon wind can rack a light panel out of plumb. We measure on site, match the gate and operator to how the property actually gets used, and set posts at proper footing depth so the install holds through haboob season. We install for homeowners, landlords, and property managers, and we price the whole job in writing before any work begins. That installation background is also why our repairs diagnose at a build level rather than guessing at the symptom.
Automatic Gate Installation
An automatic gate is a gate plus an operator, and here the operator has to survive 150°F-plus metal surface temps and grit in the drive.
Signs you need it
You’re relying on a manual gate that nobody wants to get out and open, or an existing operator has quit and the parts no longer make sense to chase.
What it costs in Phoenix
A full automatic gate installation in Phoenix typically falls in the range shown in the pricing table below, with the final figure set by the written estimate after we measure.
How we do it
We take an on-site measurement, confirm hinge and post placement and swing clearance, set posts at proper footing depth, hang the gate, mount the operator, then wire and test the safety edges and travel limits before we call it done.
Sliding Gate Installation
Sliding gates suit the block-wall lots common across Phoenix, but only if the track is built to shed the caliche grit that monsoon dust leaves behind.
Signs you need it
Your driveway is too narrow for a swing gate’s arc, or a swing panel keeps catching wind and racking out of alignment.
What it costs in Phoenix
Sliding gate installation in Phoenix is typically estimated in the range shown in the table below, and the written quote is what sets the final price.
How we do it
We lay out the track run and footing line, set the posts and track at proper depth and fall, mount the carriage and gate panel, then align rollers and stops so the gate tracks clean and clears grit rather than grinding it in.
What Gate Installation Costs in Phoenix
Installation pricing depends on gate size, material, operator choice, and how much site prep the footing and track need. These are typical estimated ranges.
| Item | Typical range in Phoenix |
|---|---|
| Gate installation (measured and quoted per job) | Estimate set on site |
| Automatic gate with operator | Estimate set on site |
| Sliding gate with track and carriage | Estimate set on site |
Can you install a gate that holds up to Phoenix heat and dust?
Yes. We specify finishes, lubricants, and hardware rated for extreme dry heat and dust, and we set posts at proper footing depth so monsoon wind does not rack the panel. The written estimate covers the full install.
Do you handle the power run and safety edges on an automatic gate?
Yes. Automatic gate installation includes wiring the operator, mounting and testing safety edges, and setting travel limits so the gate stops and reverses correctly. Anything electrical gets done by a trained professional, never as a homeowner project.
Brands We Service in Phoenix
We work on the brand you already have: FAAC, BFT, Linear, Viking, and the rest of the operators common on Phoenix gates. We don’t claim stocked parts for every brand, so turnaround depends on what the specific unit needs. See our brands for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Phoenix, AZ
Every job is priced per job from the written estimate, and you’ll know that number before any work starts.
| Service | Typical range in Phoenix |
|---|---|
| Gate repair | Estimate set on site |
| Electric gate repair | Estimate set on site |
| Gate installation | Estimate set on site |
| Automatic gate installation | Estimate set on site |
| Sliding gate installation | Estimate set on site |
| Hinge and hardware replacement | Estimate set on site |
| Track and roller service | Estimate set on site |
| Operator or control board replacement | Estimate set on site |
In Phoenix, price goes up with gate weight and material, motor and operator grade, and how much footing or track work the site needs after years of heat and grit. Nothing gets added after the fact: the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Phoenix
We cover Phoenix from the older block-wall ranch streets through the newer north valley builds, and we route technicians by area to keep drive times down. Fast dispatch from 7am to 7pm, Sunday through Friday, and we answer 24/7. Representative areas we work in:
- Sunnyslope and the 85021 corridor
- North Phoenix around 85020 and 85029
- The 85051 area near Olive Avenue
- Central Phoenix and the 85079 ZIP
- North valley stucco-and-block neighborhoods
Service Area – Cities Near Phoenix
Phoenix sits in the middle of the valley, and we cover the surrounding cities as part of the same service area. If you’re just outside Phoenix, we can still get to you. We also work in Paradise Valley, AZ, Glendale, AZ, Tempe, AZ, and Avondale, AZ. Call (866) 361-9597 to confirm coverage for your address and book a free estimate.
Serving Phoenix, AZ – Our Local Coverage Area
We serve Phoenix and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Phoenix
We dispatch Sunday through Friday, 7am to 7pm, and a call outside those hours is booked into the next opening. For repair and emergency calls we aim for same-day service where the schedule allows. Call (866) 361-9597 and we’ll give you the soonest slot.
Often yes. Most cities require a permit when a gate involves new footings or electrical work, and many Phoenix HOAs have their own rules on gate style and height. Ask your city’s building department and check your HOA before ordering, and we’ll tell you what the job involves.
Yes. We cover Phoenix end to end, from the older block-wall neighborhoods to the newer north valley builds, plus the surrounding cities. Call (866) 361-9597 with your address and we’ll confirm coverage and set up a free estimate.
Gate down means security down, and a Phoenix gate that fails in the heat or fills with monsoon grit won’t fix itself. We diagnose the system you already have, quote the price in writing before any work starts, and handle the whole job from the motor to the panel. Call (866) 361-9597 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Phoenix Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Hector Reyes"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Dana Rhodes"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Elena Salazar